Ø52mm standard belt conveyor with shifted drive and 230V/400V three-phase gearmotor. Band with slats and adjustable side edges. Delivered without leg sets.

Toothed three belt conveyor with:

• 50 mm belt width
• conveyor structure in 45×45 profile
• direct drive with gear motor offset flange

Belt conveyor Ø100 mm with sidewalls on the ends of the belt. Direct drive with SEW motor option. Two 45×45 profile legs.

Retractable housing in profile 45×45 eco and filling in black grid mesh 10×10 & 25×25 with:
– Two sliding parts one inside the other mounted on guide rails and runners in the lower part and on a telescopic rail in the upper part.
– Vertical balanced door on counterweight type 90 stroke 800 mm on ball guide rail
– The set is delivered assembled.

2 Ø90 mm direct-drive conveyors fitted with a belt with sidewalls. An articulated system allows an operator to pass by maneuvering the conveyor on wheels.

Ø90 mm direct drive conveyor with standard PVC belt, standard adjustable legs and guide rails.

Belt conveyor Ø25 mm with standard green PVC belt 35 mm wide, fixed guide rails in aluminum sheets and intermediate drive. The set is mounted on standard castor legs and wired to a variable speed drive.

Two blue belt conveyors with shifted drive and adjustable guide rails. The set is composed of an inclined conveyor and a horizontal conveyor and allows to drive the pieces with a level change. The whole is delivered assembled and wired on on/off boxes.

Soundproof unit made with 45×45 and 45×90 profile, with hinged door and casing in white PVC panels thickness: 8mm mounted in the groove. Soundproofing is ensured by sticking foam with pins on the inside. The set comes assembled.

Protection made with 45×45 and 45×90 closed faces profiles mounted on adjustable feet and floor brackets. The protection is equipped with two double hinged doors, a vertical door balanced on counterweight, a cap with a hatch. A belt conveyor can be integrated inside the protection.

Blue modular belt conveyor with 40×80 profile structure, Ø120 mm end rollers, direct drive on the right and standard adjustable guide rails. The assembly is mounted on 45×45 profile leg sets.

Belt conveyor Ø90 mm equipped with :
– Structure in profile 40×80 (Ref : 900-607)
– Belt width = 650 mm
– Overall length = 3500 mm
– Right shifted drive
– Smooth black PVC belt
– Fixed guide rails on one side made of 30×30 profile covered with a brushed aluminium sheet with oblong holes for detector beam’s passage
– Adjustable guide rail on the other side made of 30×30 profile covered with a brushed aluminium sheet with burnished steel joint and locking system
– Standard leg sets mounted on swivel castors Ø125 mm with bayonet and floor plate. Height = 900 mm +/- 50 mm
– Conveyor equipped with push button, emergency stop, detectors, all connected ton an electrical box.
– End caps and grey cover profile on all unusued slots
The set comes assembled.

Gravity conveyor made with 45×90 profile mounted on adjustable feet and floor fixing brackets.
Ramp with Ø20 mm PVC free rollers with a pitch of 22,5 mm.
Folded sheet metal longerons fixed to the conveyor structure.
Mechanical stop in 45×32 profile with a rubber band.
The set comes assembled.

Movable walkway with staircase in 90×90 and 45×90 aluminium profile mounted on braked swivel castors.
Floor and steps made with teardrop pattern sheet metal flooring.
Guardrail in 45×45 profile, height = 1100 mm

Direct drive belt conveyor Ø100 mm with felt belt 3000 mm long and 1000 mm wide. The whole is mounted on 45×90 profile legs.

Belt conveyor Ø52 with camera control equipped with :

– Structure in profile 45×45 (ref. 900-608)
– Right direct drive
– Blue PVC belt
– Standard adjustable guide rail with declutchable handle
– Leg sets with braked Ø100 mm swivel castors
– White Dibon covering with two doors
– Grey melamine worktop
– Articulated screen support
– 5-socket block
– Standard variable speed drive integrated in an IP66 box and fixed on leg sets

Framing with articulated door made with profile 45×45, 45×90 and 90×90.

Lower part composed of two doors.

Upper part composed of one articulated door manoeuvrable by gas actuators with handle and locking catch.

The whole comes assembled.

Assembly with closed profiles and painted aluminium metal sheets.

The whole, which can be completely dismantled, is placed on a retention tank.

Framing in profile 45×45 with a hood manoeuvrable by gas actuator.

All grooves are sealed with black cover profile.

The whole comes assembled.

Structure in 45×45 and 45×90 profile, fixed on swivel castors Ø100 mm (2 equiped with brakes).

The two shelves are adjustable in height. They’re mounted on hydraulic actuators maneuverable by box with up and down button.

The shelves are also adjustable in inclination.

The set is delivered assembled.

Belt conveyor Ø90

Belt width = 1200 mm

Length = 4000 mm

Assembled with 40×80 profile legs.

Framing in profile 45×45 ECO with swing doors, conveyor tunnels, cap.

The whole structure can be taken apart.

Platform with railing in profile 45×45 and 45×90, fixed on swivel castors.

Teardrop pattern metal sheet staircase and flooring.

Platform mounted on electric actuators maneuverable by box with up and down button.

Workstation with height and slope adjustability.

Fixed lower shelf

Socket block and LED lighting

Workstation with dynamic shelving, shelves, articulated monitor support arm and LED lighting.

Framing in closed profiles

Casing made with black wire mesh end transparent PET

Dual belt conveyor Ø52 with 2 intermediate drives, fixed guide profile and adjustable legs.

Conveyor equiped with a sheet metal painted casing and a trapdoor controled with a safety switch.

The whole is mounted on a structure made with 40×80 profile.

Trh type fly roller chain conveyor.

Allows to carry trays with heavy charges.

Structure in black mat thermolaquered aluminium profile 90×90 and 45×90.

Casing in black mat melamine.

Complete light tightness.

Conveyor with stapled high grip belt.

Length =  7 m

Height = 2,5 m

Assembled with 45×45 profile legs.

Structure in profile 40×40 light.

Five drawers with ball drawer slides and front in white Dibond.

Sliding shelves with ball drawer slides, handles and catch system.

Worktop in white Compact 8 mm thick.

Framing in profile 45×45 ECO.

Swing doors with handles, hinges and ball catch system.

Sliding and lockable upper part.

Conveyor tunnels.

Balanced vertical door.

Sampling drawer.

Belt width 1000 mm.

Shifted drive.

Adjustable lateral and central guide profile.

Adjustable legs.

Workstation at the end with shelves, LED lighting and documents holder.

Framing in profile 30×30.

Grey cover profile in slots.

Transparent PET.

Swing doors with handles, hinges and ball catch system.

Platform in profile 45×45 and 45×90.

Powder coated safety railing.

Steel grating flooring.

Gooseneck conveyor Ø52 with green PVC belt, slots and corrugated sidewalls.

Leg made with profile 45×45.

Vertical balanced door in profile 45×45 and 45×90 sections.

Transparent PET.

Manœuvrable door with counterweights.

Dual belt conveyor with direct drive.

Monobloc drive roller.

Without legs and guide profile.

Closed profile framing with two sing doors.

Laminated glass (upper part).

Grey Dibond (lower part).

Dual belt conveyor Ø52 with direct drive.

High grip belt.

Hollowness filled with galvanised metal sheet.

Adjustable standard guide profile.

Staircase with platform in profile 45×45 fixed on wheels.

Teardrop pattern metal sheet staircase and flooring.

Framing in profile 45×45.

Conveyor tunnel.

Transparent PET assembled in the profile slot.

Platform in aluminium profile 45×45, 45×90 and 45×90°R.

Teardrop pattern sheet metal flooring.

Tilted belt conveyor Ø52 with direct drive.

High grip belt and adjustable leg.

Structure in aluminium profile 45×180, 45×90 and 45×45.

Teardrop pattern sheet metal stair.

Aluminium profile workstation with electrical height adjustability.

Retractable shelves, feet tray, storage.

Packing preparation station.

Sliding drawers.

Integration of a bin bag holder.

Storage for cardboards of different sizes.

Aluminium structure housing.

Transparent polycarbonate panel and aluminium sandwich panel.

Aluminium structure with closed profiles.

Curved door with an opening assistance by gas spring.

Assembly Transfer TRC.

Aluminium tray.

Stop and position system.

Aluminium structure.

Magnetic panels with colour print and dry wipe VELLEDA covering.

Belt conveyor Ø50 with direct drive and horizontal motor reducer.

Belt conveyor Ø90 with direct drive.
Belt with slats.

Table in aluminium profile with load bearing balls.

Circular tray in compact laminate.

Aluminium station fixed to castors.

Soundproofing with spiked foam.

Height adjustable workstation in aluminium profile,

(hydraulical gas springs controlled by a manual pump with crank)

Laminated tray with edges.

Retractable shelves.

Aluminium structure fixed to castors.

Laminated top with edges.

Aluminium sandwich pannels.

Belt conveyor Ø90 with shifted drive.
Belt with slats.
Detection cells.
Leg sets with floor indexing castors.

Computer workstation fixed to castors. 

With 24V battery, inverter and power strip for computer electrical supply.

Compact laminate trays.